Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 129)

Chapter 8. Quick Guides
121
Creating and Running a New Endpoint
Protocol with a New Template
See Chapters 4 and 5 for details.
1. Select New Endpoint Protocol from the FILE menu.
2. Fill in the information for the Protocol window:
a. Specify any initial wait.
b. Specify any absorbance/ratio delay.
c. Specify reading parameters.
3. Click on Show Template to display a template of 96 undefined wells.
a. Follow steps 2–8 of Creating a New 96-Well Template on page 117 to
define the template.
b. Close the template by clicking on the Close box.
4. Back in the Protocol window, choose all reports to be automatically displayed
and/or printed by clicking Reports....
a. While in the Reports dialog box, click on Labels... to choose labels to
print on each report.
b. Also click on Fill Labels... to enter text to be printed along with the labels
on each report.
c. Click on OK to close the Reports dialog and return to the Protocol.
5. Save the Protocol by choosing Save Protocol or Save Protocol As... from the
FILE menu.
6. Initiate the Protocol by clicking on Run.
7. At the end of the run, save the data by choosing Save Data/Template or Save
Data/Template As... from the FILE menu.