5 configuring the user priority, 6 checking the configuration, 1 establishing the configuration task – Panasonic NN46240-501 User Manual
Page 104: Applicable environment, Preconfiguration tasks, 5 configuring the user interface priority -7, 6 checking the configuration -14, 1 establishing the configuration task -14, 3 configuri, 4 configuring local user management
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5 User management
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
Step 3 Run:
set authentication password { cipher | simple }
password
This command configures the password for local authentication.
Step 4 Run:
system-view
The system view appears.
Step 5 Run:
The AAA view appears.
Step 6 Run:
local-user
user-name
password { simple | cipher }
password
This command configures the local user name and password.
—End
5.3.5 Configuring the user priority
For information, see
Nortel Secure Router 8000 Series Configuration Guide - Security
(NN46240-600).
5.3.6 Checking the configuration
Run the following commands to check the previous configuration.
Action
Command
Check user information.
display users [ all ]
Check information for local users.
display local-user
Check information for access users.
display access-user
5.4 Configuring local user management
5.4.1 Establishing the configuration task
Applicable environment
You can create and manage the separate local user on the broadband access server.
Preconfiguration tasks
None
5-14
Nortel Networks Inc.
Issue 5.3 (30 March 2009)