1 establishing the configuration task, Applicable environment, Preconfiguration tasks – Panasonic NN46240-501 User Manual
Page 206: Data preparation, Configuration procedures, 1 establishing the configuration task -3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
11 System software upgrade
11.3 Specifying the system software for the next router
startup
11.3.1 Establishing the configuration task
Applicable environment
A
CAUTION
Specify the same system software for the master and slave RPUs. Otherwise, the system does
not function.
After the files are uploaded, you need to instruct the system to use the newly loaded system
software the next time the router is restarted. Nortel recommends that you use the absolute
paths to specify system software of the same version to the master and slave RPUs. The
system uploads the software at the specified path the next time the router is restarted.
Preconfiguration tasks
None.
Data preparation
Before you specify the system software for the next router startup, prepare the absolute path
of the system software.
Configuration procedures
No.
Procedure
1
Specifying the system software for the next startup of the master RPU
2
Specifying the system software for the next startup of the slave RPU
3
11.3.2 Specifying the system software for the next startup of the
master RPU
Do as follows on the router you want to upgrade.
Run:
startup system-software
f i l e - n a m e
This command specifies the packet file for the next startup of the master RPU.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
11-5