Commands displaying system configuration, Commands displaying system status, Commands displaying system statistics – Panasonic NN46240-501 User Manual

Page 86: Displaying rpu restart information, 3 displaying rpu restart information -8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Nortel Secure Router 8000 Series

Configuration Guide - Basic Configuration

4 Basic configuration

The following sections show only the system display commands. For information about
display commands for protocols and interfaces, see the related sections in this document.

You can run the following commands in all views.

Commands displaying system configuration

Run the following commands as required:

display version: displays the system edition.

display clock: displays the system time.

display users [ all ]: displays the terminal user.

display saved-configuration: displays the original configuration.

display current-configuration: displays the current configuration.

Commands displaying system status

Run the following commands as required:

display debugging [ interface

interface-type interface-number

] [

module-name

]:

displays the debugging status.

display this: displays the configuration of the current view.

Commands displaying system statistics

Run the following commands as required:

display diagnostic-information [

file-name

]: displays system diagnosis information.

When the system fails or performs routine maintenance, you need to collect detailed

information to locate the fault. However, there are many display commands. You can use the
display diagnostic-information command to collect the running information of the current

modules in the system.

The display diagnostic-information command collects all display information of the

following commands: display clock, display version, display cpu, display interface,

display current-configuration, display saved-configuration, and display
history-command.

Displaying RPU restart information

Run one or both of the following commands as required:

display system restart: displays information about the last 10 AMB restarts.

display system slave-restart: displays information about the last 10 Slave Main Board
(SMB) restarts.

The restart time and possible causes are displayed.

Issue 5.3 (30 March 2009)

Nortel Networks Inc.

4-7

Advertising