Panasonic NN46240-501 - Manual (Page 159)

8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
8.9.3 Example of configuring the FTP client
Networking requirements
As shown in Figure 8-3, the router that serves as the FTP client can access the FTP server and
download system software and configuration software from the FTP server.
Figure 8-3 Configuring the FTP client
} ^GE2/0/0^^
----------i IP Network
M
----------------- ^9
Server ^
^ J
Router
172.16.104.11^ 172.16.105.111/24
Configuration roadmap
Users on the FTP client log on to the FTP server and download system files from the server to
the storage devices on the client side.
Data preparation
To complete the configuration, you need the following data:
• IP address of the FTP server
• The destination file name and its position in the router
Configuration procedure
Step 1 Log on to the FTP server from the router.
< N o r t e l > ftp 172.16.104.110
T r y i n g f t p 1 7 2 . 1 6 . 1 0 4 . 1 1 0
P r e s s C T R L + K t o a b o r t
C o n n e c t e d t o f t p 1 7 2 . 1 6 . 1 0 4 . 1 1 0
2 2 0 F T P s e r v i c e r e a d y .
U s e r ( f t p 1 7 2 . 1 6 . 1 0 4 . 1 1 0 : ( n o n e ) ) : n o r t e l
3 3 1 P a s s w o r d r e q u i r e d f o r n o r t e l
P a s s w o r d :
2 3 0 U s e r l o g g e d i n .
Step 2 Configure the transmission mode as binary format and configure the directory of the flash
memory on the router.
[ f t p ] binary
2 0 0 T y p e s e t t o I .
[ f t p ] lcd flash:/
% L o c a l d i r e c t o r y n o w f l a s h :
Step 3 Download the newest system software from the remote FTP server on the router.
8-26 Nortel Networks Inc. Issue 5.3 (30 March 2009)