1 establishing the configuration task, Applicable environment, Preconfiguration tasks – Panasonic NN46240-501 User Manual
Page 145: Data preparation, 1 establishing the configuration task -8, 6 checking the, Configuration, Run the following commands to check the, Preceding configuration, Command
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
Action
Command
Check the configuration and running
information about the FTP server.
display ftp-server
After configuring the FTP server, run the display ftp-server command. You can view that the
FTP ACL is 2345.
< Q u i d w a y >
display ftp-server
F T P s e r v e r i s r u n n i n g
M a x u s e r n u m b e r
5
U s e r c o u n t
1
T i m e o u t v a l u e ( i n m i n u t e )
3 0
A c l N u m b e r
2 3 4 5
8.5 Configuring the router to be the FTP client
8.5.1 Establishing the configuration task
Applicable environment
Configure FTP to transfer files between the FTP client and the remote server.
Preconfiguration tasks
Before you configure FTP, complete the following tasks:
•
Power on the router.
•
Connect the FTP client with the server.
Data preparation
To configure FTP, you need the following data.
No.
Data
1
Host name or IP address of the FTP server
2
Port number of the FTP server used to create the FTP connection
3
Logon user name and password
procedures
No.
Procedure
1
Configuring the source address of FTP Client
8-12
Nortel Networks Inc.
Issue 5.3 (30 March 2009)