6 configuring the local user priority, 5 configuring the user priority -14 – Panasonic NN46240-501 User Manual
Page 107
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
5 User management
Step 2 Run:
The AAA view appears.
Step 3 Run:
local-user
user-name
state { active | block }
This command configures the local user status.
—End
5.4.6 Configuring the local user priority
Do as follows on the broadband access router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
aaa
The AAA view appears.
Step 3 Run:
local-user
user-name
level
level
This command configures the local user priority.
—End
5.4.7 Configuring the access restriction of the local user
Do as follows on the broadband access router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
aaa
The AAA view appears.
Step 3 Run:
local-user
user-name
access-limit
access-limit
This command configures access restriction for the local user.
—End
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
5-17