3 generating the local rsa key pair, 3 generating the local rsa key pair -10, Generating the local rsa key pair – Panasonic NN46240-501 User Manual
Page 177: Authenticating the ssh client through the password
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9 Telnet and S SH
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
The system view appears.
Step 2 Run:
user-interface [ vty ]
first-ui-number [ last-ui-number
]
This command displays the VTY user interface.
Step 3 Run:
authentication-mode aaa
This command configures AAA authentication mode.
Step 4 Run:
protocol inbound ssh
This command configures SSH for VTY.
—End
Où NOTE
Configure the authentication mode for the VTY user interface to AAA. Otherwise, you cannot configure
SSH for VTY
9.3.3 Generating the local RSA key pair
Do as follows on the logon router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
rsa local-key-pair create
This command generates the local RSA key pair.
—End
CQ NOTE
Before you log on through SSH, you must configure the router to generate the local RSA key pair. Run
the
rsa local-key-pair create
command to generate the local key pair.
9.3.4 Authenticating the SSH client through the password
Do as follows on the logon router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
ssh user
user-name
authentication-type password
9-10
Nortel Networks Inc.
Issue 5.3 (30 March 2009)