1 establishing the configuration task, Applicable environment, Preconfiguration tasks – Panasonic NN46240-501 User Manual
Page 199: Data preparation, Configuration procedures, 2 querying the electronic label, 3 backing up the electronic label, 5 configuring the electronic label -9, 2 querying the electronic label -9, 1 establishing the configuration task -3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
10 Router maintenance
10.5 Configuring the electronic label
10.5.1 Establishing the configuration task
Applicable environment
To query the electronic label information of all boards including the optical module and
individual entities on the boards, or to back up the electronic label information to a specified
FTP server, you must configure the electronic label function.
Preconfiguration tasks
None.
Data preparation
None.
Configuration procedures
No.
Procedure
1
2
Backing up the electronic label
10.5.2 Querying the electronic label
Run:
d i s p l a y e l a b e l [
slot-id ]
This command queries the electronic label.
10.5.3 Backing up the electronic label
Do as follows on the router whose electronic label you want to back up.
Step 1 Run:
s y s t e m - v i e w
The system view appears.
Step 2 Run:
b a c k u p e l a b e l f t p
host filename username password [ slot-id ]
This command backs up the electronic label to a specified FTP server.
—End
CQ NOTE
The parameter
filename
must end with .fls to back up the label to the FTP server.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
10-9