2 configuring the basic acl, 3 configuring the basic tftp acl, 2 configuring the basic acl -14 – Panasonic NN46240-501 User Manual
Page 153: 3 configuring the basic tftp acl -14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
No.
Procedure
Configuring the basic TFTP ACL
8.7.2 Configuring the basic ACL
Do as follows on the router that serves as the TFTP client:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
acl
acl-number
The ACL view appears.
Step 3 Run:
rule [
rule-id
]
{
deny | permit }
[ source {
|
source-ip-address
{ source-wildcard
|
0 }
| any }
| time-range
time-name
| vpn-instance
vpn-instance-name
]
This command configures the ACL rule.
—End
CÛ NOTE
TFTP supports only the basic ACL rules.
8.7.3 Configuring the basic TFTP ACL
Do as follows on the router that serves as the TFTP client:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
tftp-server [ ipv6 ] acl
acl-number
ACL is used to limit access to the TFTP server.
—End
8-20
Nortel Networks Inc.
Issue 5.3 (30 March 2009)
2