Panasonic NN46240-501 - Manual (Page 76)

Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration 3 CLI overview
Key Function
ESC_SHIFT_< Sets the position of the cursor to the beginning of the
clipboard.
ESC_SHIFT_< Sets the position of the cursor to the end of the
clipboard.
3.10.2 Defining shortcut keys
CÛ NOTE
When you define shortcut keys, use double quotation marks to define the command if it contains several
command words (that is, spaces exist in the command).
Configure shortcut keys as follows in the system view.
Action Command
Define shortcut
keys.
hotkey { CTRL_G | CTRL_L | CTRL_O } command-text
3.10.3 Using shortcut keys
• You can press the shortcut keys wherever you can type a command. The system then
displays the full corresponding command.
• If you type part of a command and do not press Enter, you can press the shortcut keys to
clear the input and display the full corresponding command. This operation has the same
effect as deleting all commands and then reentering the complete command.
• The shortcut keys are run as commands; the syntax is recorded in the command buffer
and log for fault location and querying.
CQ NOTE
The terminal in use can affect the functions of the shortcut keys. For example, if the customized shortcut
keys of the terminal conflict with those of the router, the input shortcut keys are captured by the terminal
program and, therefore, the shortcut keys do not function.
Run the following command in any view to display the shortcut keys.
Action Command
View the shortcut keys. display hotkey
Issue 5.3 (30 March 2009) Nortel Networks Inc. 3-13