Panasonic NN46240-501 - Manual (Page 142)

Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration 8 FTP, TFTP, and Xmodem
This command configures the FTP service type.
Step 3 Run:
local-user user-name ftp-directory directory
This command configures the authorized directory of the FTP user.
—End
8.3.8 Checking the configuration
Run the following commands to check the previous configuration.
Action Command
Check the configuration and
running information of the FTP
server.
display ftp-server
Check the FTP logon user. display ftp-users
Run the display ftp-server command. If the configuration and the status of the FTP server are
displayed, the configuration is successful.
< N o r t e l > display ftp-server
F T P s e r v e r i s r u n n i n g
M a x u s e r n u m b e r 5
U s e r c o u n t 1
T i m e o u t v a l u e ( i n m i n u t e ) 3 0
A c l n u m b e r 0
Run the display ftp-users command. If information about the FTP logon users is displayed,
the configuration is successful.
< N o r t e l > display ftp-users
U s e r n a m e h o s t p o r t
n o r t e l 1 0 0 . 2 . 1 5 0 . 2 1 1 4 6 4 1
i d l e t o p d i r
0 f l a s h :
8.4 Configuring FTP ACL
8.4.1 Establishing the configuration task
Applicable environment
Configure FTP to transfer files between the FTP client and the remote server.
When the router serves as the FTP server, for security, you can configure the router by ACL to
be accessed by only those clients that satisfy the matching conditions.
Preconfiguration tasks
Before you configure FTP, complete the following tasks:
Issue 5.3 (30 March 2009) Nortel Networks Inc. 8-9