1 establishing the configuration task, Applicable environment, Preconfiguration tasks – Panasonic NN46240-501 User Manual
Page 154: Data preparation, 2 retrieving a file through xmodem, 2 retrieving a file through xmodem -15, 1 establishing the configuration task -6, 8 configuring xmodem
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
8 FTP, TFTP, and Xmodem
8.8 Configuring Xmodem
8.8.1 Establishing the configuration task
Applicable environment
Configure Xmodem to transfer files through serial interfaces.
Preconfiguration tasks
Before you configure Xmodem, complete the following tasks:
•
Power on the router.
•
Connect the router and the PC through an AUX port or a console port.
•
Log on to the router through the terminal emulation program and specify the file path in
the terminal emulation program
Data preparation
To configure Xmodem, you need the following data.
No.
Data
1
Name of a specific file
2
Absolute path of the file
procedures
No.
Procedure
1
Retrieving a file through Xmodem
8.8.2 Retrieving a file through Xmodem
Do as follows on the router:
Run:
Xmodem get
filename
Xmodem is used to retrieve the file.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-21