Applicable environment, Preconfiguration tasks, Data preparation – Panasonic NN46240-501 User Manual
Page 120: Configuration procedure, 2 managing directorie, 3 managing files, 4 configuring batch configuration, 5 managing storage devices
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 File system management
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
6.4 Configuring batch configuration
Applicable environment
You can run established batched files to perform fixed tasks automatically.
Preconfiguration tasks
Before you configure the batch process, complete the following tasks:
•
Power on the router.
•
Log on to the router.
•
Upload the batched files on the client end to the router.
Data preparation
To configure the batch process, you need the following data.
No.
Data
Name of the batched file
Configuration procedure
Do as follows on the router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
execute
filename
This command runs the batched file.
—End
6.5 Managing storage devices
Applicable environment
When the router cannot store messages normally, you must fix any faulty storage devices.
Preconfiguration tasks
Before you configure the storage devices, complete the following tasks:
• Power on the router.
6-8
Nortel Networks Inc.
Issue 5.3 (30 March 2009)
1