4 setting terminal attributes, 5 configuring the user interface priority, 2 configuring a user interface -4 – Panasonic NN46240-501 User Manual
Page 97: 4 setting terminal attributes -7, Setting terminal attributes, Configuring the user interface
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
5 User management
By default, the data bit is 8.
—End
5.2.4 Setting terminal attributes
Do as follows on the router that the user logs on to:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
user-interface
[
ui-type ] first-ui-number [ last-ui-number ]
The user interface view appears.
Step 3 Run:
Shell
The terminal service starts.
Step 4 Run:
idle-timeout
minutes [ seconds ]
This command configures the timeout period.
Step 5 Run:
screen-length
screen-length
This command configures the terminal screen length.
Step 6 Run:
history-command max-size
size-value
This command configures the history command buffer.
—End
5.2.5 Configuring the user interface priority
Do as follows on the router that the user logs on to:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
user-interface
[
ui-type ] first-ui-number [ last-ui-number ]
The user interface view appears.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
5-7