Panasonic NN46240-501 - Manual (Page 151)

8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
No. Data
2 Name of the specific file in the TFTP server
3 File directory
4 ACL number
Configuration procedures
No. Procedure
1 Configuring the source address of TFTP Client
2 Downloading Files Through TFTP
3 Uploading Files Through TFTP
8.6.2 Configuring the source address of TFTP Client
Do as follows on the router that serves as the TFTP server:
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
tftp client-source { -a s o u r c e - i p - a d d r e s s | -i { i n t e r f a c e - n a m e | i n t e r f a c e - t y p e
i n t e r f a c e - n u m } }
The source address of TFTP client is started.
—End
8.6.3 Downloading Files Through TFTP
Do as follows on the router that serves as the TFTP client:
Step 1
Run the following commands according to different type of the server IP addresses.
• The IP address of the server is IPv4 address, run:
tftp [ -a s o u r c e - i p - a d d r e s s | -i { i n t e r f a c e - n a m e | i n t e r f a c e - t y p e i n t e r f a c e - n u m } ]
t f t p - s e r v e r get s o u r c e - f i l e n a m e [ d e s t i n a t i o n - f i l e n a m e ]
The router is configured to download files through TFTP.
• The IP address of the server is IPv6 address, run:
tftp ipv6 [ -a source-ip-address ] t f t p - s e r v e r [ -i i n t e r f a c e - t y p e
i n t e r f a c e - n u m b e r ] get s o u r c e - f i l e n a m e [ d e s t i n a t i o n - f i l e n a m e ]
The router is configured to download files through TFTP.
8-18 Nortel Networks Inc. Issue 5.3 (30 March 2009)