Panasonic NN46240-501 - Manual (Page 155)

8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
OQ NOTE
• Before you retrieve the file, confirm the path and name of the file.
• For filename, an absolute path name is required.
• If the filename value is similar to an existing file name, the system sends a prompt asking you
whether to overwrite.
8.9 Configuration examples
8.9.1 Example of configuring the FTP server
Networking requirements
As shown in Figure 8-1, the IP address of the FTP server is 172.16.104.110/24.
Log on to the router from the HyperTerminal and then download files from the FTP server.
Figure 8-1 Using FTP to download files
Server
^172.16.104.110/24
1 ---- [
^^g^^console cable^^^
Configuration roadmap
1. Run the HyperTerminal on the PC and log on to the router.
2. Use the correct user name and password to log on to the FTP server to download the files
in the memory of the router.
Data preparation
To complete the configuration, you need the following data:
• FTP user name (nortel) and password as (nortel) on the server
• correct path of the original files on the FTP server
• destination file name and its position in the router
Configuration procedure
Step 1 Enable FTP on the FTP server and configure the authentication information for the FTP user.
< N o r t e l > system-view
[ N o r t e l ] s ysname server
[ S e r v e r ] ftp server enable
8-22 Nortel Networks Inc. Issue 5.3 (30 March 2009)