Panasonic NN46240-501 - Manual (Page 157)

8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
l o c a l - u s e r n o r t e l f t p - d i r e c t o r y f l a s h : / f t p / s y s t e m
a u t h e n t i c a t i o n - s c h e m e d e f a u l t
#
a u t h o r i z a t i o n - s c h e m e d e f a u l t
#
a c c o u n t i n g - s c h e m e d e f a u l t
#
d o m a i n d e f a u l t
#
8.9.2 Example of configuring FTP ACL
Networking requirements
As shown in Figure 8-2, the IP address of the FTP server is 172.16.104.110/24.
At the client side, PC1, PC2, and the FTP server are reachable. After configuring ACL, the
router that serves as the FTP server allows only PC1 with the host address of 172.16.104.111
to download and upload files in FTP mode. PC2 cannot connect to the FTP server.
Figure 8-2 FTP ACL
PC2
172.16.105.111/24
Server
172.16.104.110
PC1
172.16.104.111/24
Configuration roadmap
The configuration roadmap is as follows:
1. Configure the basic FTP functions.
2. Configure ACL on the FTP server.
Data preparation
To complete the configuration, you need the following data:
• ACL number
Configuration procedure
Step 1 Configure basic FTP functions.
For details, see “Configuring the router to be the FTP server.”
8-24 Nortel Networks Inc. Issue 5.3 (30 March 2009)
R e t u r n