Holtgreven GSE-375 User Manual
Page 35
29
P5010 Setpoint Annunciators (Toggle)
Enables or disables the setpoint annunciators to the left of the main 7-segment display.
P5100 Setpoint Operation (Selection)
Sets the desired Setpoint operation. Choose between None, ChecP, Fill, Batch, Discharge, Both,
ChecA or Independent. See General Setpoint Setup on page 36 for complete details on setpoint
setup and operation.
P
P
r
r
i
i
n
n
t
t
i
i
n
n
g
g
P
RESET
T
RANSMIT
S
ELECTIONS
The Model 370 and Model 375 provide 16 preset formats for printing tickets or sending data to a
computer. Only one format or custom transmit may be enabled at a time.
Choice 0 Custom Transmit:
User-defined serial data string (see Custom Transmit Setup on page 31).
Choice 1 GSE Standard Transmit:
HH:MM:SS am MM/DD/YY <CR><LF> (only if P502 is enabled)
XXX.XX kg Gross<CR><LF>
XXX.XX kg Tare <CR><LF>
XXX.XX kg Net <CR><LF>
Choice 2 Count:
HH:MM:SS am MM/DD/YY <CR><LF> (only if P502 is enabled)
XXX Count <CR/LF>
XX.X kg APS <CR><LF>
XXX.XX kg Gross<CR><LF>
XXX.XX kg Tare <CR><LF>
XXX.XX kg Net <CR><LF>
(NOTE: The time and date will only be printed in choice 1 and 2 if P502 is enabled).
Choice 3 (Condec Clone):
<STX> <POL> <DATA> <L/K> <G/N> <STAT> <CR> <LF>
Where:
<STX> is a single control code, decimal value of 2.
<DATA> is 8 characters, 1st character is either minus sign or a space, padded with leading spaces, with an
embedded decimal point.
<L/K> is a single 'L' or 'K' character to indicate lb or kg units.
<G/N> is a single 'G' or 'N' character to indicate gross or net data.
<STAT> is an 'O' (overload/underload), 'M' (motion), or space otherwise.
<CR> is a single control code (carriage return), decimal value of 13.
<LF> is a single control code (line feed), decimal value of 10.
Choice 4:
<STX><SignedDATA><sp><lb/kg><sp><Gross/Net/Qty><STAT><CR>
Choice 5:
<STX><Signed DATA><sp><lb/kg><STAT><CR>
Choice 6:
<STX><Signed DATA><sp><lb/kg><CR>