KEYENCE BL-600 Series - Manual (Page 123)

113
Chapter 7 Serial Communication
7
Read data format
Set the data format of the Header and Delimiter, respectively.
With the setup software, the following formats can be selected. Other than the
following formats, you can freely set up to 5 characters.
Header: <ESC> (1BH), <STX> (02H), None
Delimiter: <CR> (0DH), <CR> (0DH) <LF> (0AH), <ETX> (03H)
Read error code
If the BL-600 Series fails to read a bar code, it sends back a read error code.
The initial setting of the read error code is as follows:
The read error code can be changed as desired (within 8 characters).
The BL-600 can be set to send no error code.
➮ See page 43.
Header Read data Delimiter
Header ERROR Delimiter