KEYENCE BL-600 Series - Manual (Page 53)

43
Chapter 4 Setup Software
4
“Additional information” ➮ See pages 102 to 106.
Select the items as required.
* “Scan count” only appears when “Decoding count” is selected.
When “PMI” is selected:
Click the [Set] button to display the “PMI output setting” screen.
Specify a value within the range of 0 to 100 for each item.
➮ See pages 104 to 106.
“Decoding match count”
Enter a desired value within the range of 1 to 255 (times).
Specifying a large number for “Decoding match count” increases the
reliability of the reading, but decreases the reading speed.
Specifying a small number for “Decoding match count” increases the
reading speed, but decreases the reliability of the reading.
Typically, the initial value “2” is used.
“Read error”
Specify the error code that the BL-600 Series will send to the personal
computer if it fails to read a bar code.
This code can be changed as desired using 8 or less characters.
Typically, the initial setting of “ERROR” is used.
If the text box is left empty, the BL-600 Series will not send a read error
code.
Reference: “Decoding match count”
The BL-600 Series judges that a bar code has been properly read when the num-
ber of scans for successful decoding (reading) of the bar code (Decoding count)
reaches the value specified in “Decoding match count”.