KEYENCE BL-600 Series - Manual (Page 138)

Chapter 7 Serial Communication
128
7
■ Utility Setting (Stability LED, OK/NG output duration, Preset data for
compare)
To register the preset data, send the following command.
Example
Register “ABC123” as preset data.
WP68ABC123
Tips
Function Command being Response Description Error
sent code
Change WP09n OK n=0: Disable
Confirm RP09 09n 1: Enable
Change WP40nnn OK nnn= 001 to 255
Confirm RP40 40nnn (by 10 ms step)
Change WP68aaa... OK aaa...= Preset data
Confirm RP68 68aaa... (Up to 32 characters)
* For CODE128,
see P.136 to 137.
* To delete the
preset data, send
WP68.
Change WP0Mn OK
Confirm RP0M 0Mn
Change WP0Rn OK n= 0: OFF
Confirm RP0R 0Rn 1: On
Change WP85n OK n = 0: Disable output
Confirm RP85 n 1: Enable output
Change WP93nnn OK nnn= 000 to 255
Confirm RP93 93nnn
Indication of
Stability LED
Setting OK/NG
output duration
Registration of
preset data for
compare
Scaling factor for
the quiet zone
Reading a
reversed bar code
Outputting the
test mode result
n = 0: 4x
1: 5x
2: 6x
3: 7x
4: 8x
5: 9x
6: 10x
7: 11x
Changing the
decoding match
count
00, 02,
05, 07,
14
00, 02,
05, 09,
14
00, 02,
05, 12,
13, 14,
17, 18
00, 02,
05, 07,
14