4 reading/saving/printing file – KEYENCE BL-600 Series User Manual
Page 69
59
Chapter 4 Setup Software
4
4.4
Reading/Saving/Printing File
This section describes how to read, save, or print settings of a file.
4.4.1 [[Files]] screen
The [[Files]] screen allows the following operation/setting of files (setting data).
4.4.2 Reading a previously saved setting file
1. Click the [Open] button.
The “Open Settings file” screen appears.
2. Select a file and click the [OK] button.
The saved file is opened.
[Open] button
Reads a file contain-
ing the saved settings
of the BL-600 Series.
[Save] button
Saves the updated
settings of the BL-600
Series to a file.
[Compare] button
Compares the file
currently being edited
with a file that was
previously saved.
[Print] button
Prints the setting.
[Version Info] button
Displays the version of
the software.
“Model”
Select the model of the
bar code reader that will
be used.
[Defaults] button
Resets the edited settings to
the initial (factory) settings.
[OK] button
Click [Cancel] to return to
the previous screen.