EVCO EVFTFT818P7U Installer manual - Manual (Page 10)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 10 of 94
2 DESCRIPTION
2.1 Description of the user interface
The following drawing illustrates the aspect of the EVFTFT818 user interface.
The following table illustrates the meaning of EVFTFT818 user interface parts.
Part Meaning
1 on/off key, herein called also "ON/STAND-BY key"
2 options key, hereon call "MENU key"
3 pre-selection key, hereon call "HOME key"
4 annul key, hereon call "ESCAPE key"
5 cycle start/cycle cut-off key, hereon called "START/STOP key"
6 interactive keys
7 display
8 interactive keys
9
RS-485 serial port with MODBUS communication protocol and communication port with control
module (signal and power supply)
10 USB serial port (only available in the model EVFTFT818P7U)
11
jumper for the insertion of the terminating resistor of the user interface-control module
communication port and of the RS-485 serial port