EVCO EVFTFT818P7U Installer manual - Manual (Page 54)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 54 of 94
11 CONFIGURATION
11.1 Setting the real date and time
Operate as follows:
1. Make sure that the instrument is in the “on” status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Press and release the HOME key (1) and then press and release the MENU key (2).
4. Press and release the key (3), press and release the key (4) or the key (5) to modify the value and
then press and release the key (6) again to confirm and select the next one.
Operate as follows to exit the procedure:
5. Press and release the ESCAPE key or do not operate for 60 s.
11.2 Setting the configuration parameters
Operate as follows:
1. Make sure that the instrument is in the “on” status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.