EVCO EVFTFT818P7U Installer manual - Manual (Page 20)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 20 of 94
2. Press and release the ON/STAND-BY key (1) and then press the highest interactive key on the left (2) to unlock
the keyboard.
3. Press and release the ON/STAND-BY (1) key.
If the duration of the power cut has been such to cause the clock error (“rtc” code), the real day and time will
have to be reset; see paragraph 10.1 “Setting the real day and time”.
5.3 Switching the device on/off
Operate as follows:
1. Make sure that the keyboard is not locked and that no procedure is in progress.
2. Press and release the ON/STAND-BY key.
5.4 The display
The display is off during the "off" status and during the "stand-by" status.