EVCO EVFTFT818P7U Installer manual - Manual (Page 22)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 22 of 94
5.5 Display of inputs and outputs status
Operate as follows:
1. Make sure that the instrument is in the “on” status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Press and release the HOME key (1), press and release the MENU key (2) and then press and release the
key repeatedly (3) in order to select the “INTERNAL VALUES”.
4. Press and release the key (4) and then repeatedly press and release the key (5) or the key (6) to
select the input or the output.
Operate as follows to exit the procedure:
5. Press and release the ESCAPE key or do not operate for 60 s.
5.6 Defrosting activation in manual mode
Operate as follows:
1. Make sure the device is in the "on" status, that pre-cooling or storage cycle is in progress.
2. Make sure that the keyboard is not locked and that no procedure is in progress.