EVCO EVFTFT818P7U Installer manual - Manual (Page 56)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 56 of 94
3. Press and release the highest interactive key on the right (1).
11.3.2 Restoring the configuration parameters
Operate as follows:
1. Access to the; see paragraph 10.3.1 “Access to the procedure”.
2. Repeatedly press and release the key (1) to set “149” and then press and release the key (2).
Operate as follows to exit the procedure:
3. Press and release the ESCAPE key or do not operate for 60 s.
11.3.3 Deleting programs
Operate as follows:
1. Access to the; see paragraph 10.3.1 “Access to the procedure”.
2. Press and release the key (1) to select “Programs”, repeatedly press and release the key (2) to set
“149” and then press and release the key (3).