EVCO EVFTFT818P7U Installer manual - Manual (Page 75)

EVCO S.p.A. EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 75 of 94
3.4 Press and release the key (4), then press and release the key (5) to select “SETUP
RECORDING”.
3.5 Press and release the key, press and release the key or the key to select the
information, then press and release the key (ot the key) to add it (or remove it).
Operate as follows to exit the procedure:
3.6 Press and release the ESCAPE key or do not operate for 60 s.
4. To the end of the download remove the USB peripheral from the USB port.
To delete the information relative to the HACCP alarms see paragraph 9.3 “Deleting the information relative to the
HACCP alarms”.