EVCO EVFTFT818P7U Installer manual User Manual
Page 73
EVCO S.p.A.
EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 73 of 94
4.
To the end of the download remove the USB peripheral from the USB port.
To make the upload of the programs operate as follows:
5.
Make sure the device is in the “stand-by” status.
6.
Insert an USB peripheral in the USB serial port; make sure the peripheral contains the text document by name
“ricette.txt” (see point 3).
7.
Press and release the
key (1) to select “UPLOAD PROGRAMS”, then press and release the
key (2): it
will automatically be started the reading (from the peripheral) of the text document by name “ricette.txt”
(containing information about the programs); the reading procedure can take some minutes.
8.
To the end of the download remove the USB peripheral from the USB port.