3 dimensions, 4 connection to the device – EVCO EVFTFT818P7U Installer manual User Manual
Page 85
EVCO S.p.A.
EVFTFT818 | Installer manual ver. 2.1 | Code 144FTFT818E214
page 85 of 94
3
power supply
4
RS-232 type serial port
5
1256800042 telephone cable
6
RJ connector
7
1256800079 adapter
8
DB connector
16.2.3
Dimensions
The following drawing illustrates the EVIF21RS7I dimensions; these are expressed in mm (in).
16.2.4
Connection to the device
Operate as follows:
1.
Cut the device power supply off.
2.
Connect the device RD-485 serial port to the EVIF21RS7I RS-485 type serial port.
3.
Insert one end of the telephone cable 1256800042 into the EVIF21RS7I RS-232 serial port.
4.
Insert the other end of the telephone cable 1256800042 into the 1256800079 adapter RJ connector.
5.
Connect the 1256800079 adapter DB connector to a Personal Computer COM, in which Parameters Manager is
installed.
6.
Connect the device power supply.
For further information, consult the documentation relative to Parameters Manager.