FingerTec Ingress - Manual (Page 34)

34
3. Name the Zone, e.g.: R&D office.
4. Click Add Device .
5. Select Ingressus from the list.
6. Name the Ingressus controller.
7. Press Edit at the Zone panel.
8. Select Time Set to access for access. No access granted if time falls out of the boundary.
9. Click Add Personnel to define the user as First Card Unlock person (he/she still can use
password or fingerprint to verify). It is optional to assign more than 1 user.
10. Click Add Door to define which Ingressus to follow this rule.
11. Press Save to save settings.
12. Sync settings to the Ingressus controller.
Multi card open
Multi card open is a security feature to unlock doors whereby at least 2 specified users must
verify themselves (fingerprint, password or card) at the same time at a door to gain access.
You can set up to a maximum of 5 users that must verify together to unlock a door.
1. Click Multi Card Open from the left panel.
2. Click Add User Group .
3. Name the User Group e.g.: R&D group.
4. Click Edit at the right panel.
5. Select the relevant users from the list.
6. Click Save to save settings.
7. Click Multi Card Combination Group from the left panel.
8. Click Add Combination Group .
9. Name the Combination Group e.g.: Restricted Area – Level 1.