FingerTec Ingress - Manual (Page 49)

49
1. Click Time Set from the left panel.
2. Click Add Holiday Time Set .
3. Describe the holiday time set, e.g.: Year End Holiday.
4. Click
Edit .
5. Name the holiday time set, e.g.: Holiday access – Morning.
6. Define the start and end time to deny access. By default, Ingress does not allow any access
throughout the day if holiday settings are in use.
If access is required during some part of the day, you can shorten the access deny time.
For example, if access is required until 12:00pm, you may set the start time as 1:00pm and
end time as 11.59pm.
7. Click Save to save settings.
8. Click Transfer to device.
You can repeat the steps above to create additional holiday time sets to suit your work-
place.
Create Holiday List to add Holiday Time Set
1. Click Holiday Settings from the left panel.
2. Click Edit .
3. Click Add to add new holiday.
4. Name the holiday.
5. Select Holiday Time Zone to apply.
6. Define the start and end date.
7. Click OK to apply.
8. Click Save to save settings.
9. Click Transfer to Device to synchronize to devices.