FingerTec Ingress User Manual
Page 35
35
10. Press
Edit
to start to configure.
11. Double click at the
No. of User Select
to be presented for verification in this group.
12. Press
Add Door
to select the Ingressus controller to follow this rule.
13. Press
Save
to save settings.
14.
Sync
to the Ingressus controller.
To Delete Zone/Device/User Group/Multi card combi-
nation group
If any of the above is not applicable in your environment, or if you wrongly added configura-
tions into the list, you can choose to delete them from the list as follows:
1.
Select
the required zone/device/user group/multi card combination group from the left
panel to be deleted.
2. Click the button at the top menu bar
(Remove Zone, Delete Device, Remove User Group
or Remove multi card combination group)
.
3. Click
Yes
to confirm delete.
Alternatively:
1. Select the item to delete.
2. Right-click on the item to select
Delete
.
3. Click
Yes
to confirm delete.