FingerTec Ingress - Manual (Page 47)

47
1. Select Time Set from the left panel.
2. Click Add Time Set.
3. Press Edit .
4. Name the time set, e.g.: Office hours.
5. Write a Description to remark the time set.
6. Set the time range to allow access with a maximum of 3 sets of time per day. In case you
want to block access for the whole day, set 11:59PM as start time and 12:00AM as end
time .
7. You can click to use the graphical
setup page as an alternative.
8. To use 2nd and 3rd interval, you must
check the box to activate it.
9. Click Copy in the next line if you want
to duplicate the same time from the
above settings.
10. Click Save to save settings.
11. Click Transfer to Device to synchro-
nize the settings to devices.
Setup of Access Group