FingerTec Ingress - Manual (Page 61)

61
Round up or round down the OT time to the nearest (minutes)
Round Up OT is rounded up to the nearest minute and is set to 15, all minutes will be rounded
up as per below:
1-15 minutes = 15
16-30 minutes = 30
31-45 minutes = 45
46-59 minutes = 1 hour
Round Down OT is round down to the nearest minute and is set to 15, all minutes will be rounded
down as per below:
1-15 minutes = 0
16-30 minutes = 15
31-45 minutes = 30
46-59 minutes = 45
Round Midpoint Once you insert a value here, the software will calculate the value’s midpoint. For ex-
ample if you set the value at 30 min, the midpoint would be 15 min. The clocking
schedule’s OT time is 6.00pm and the midpoint is 15 min.
If the user verifies in less than 15 minutes after the OT time, for example 6.15pm, the
software will round down the transaction data to be displayed as 6.00pm. If the user
verifies more than 15 minutes after the IN time, the software will round up the transac-
tion data to be displayed as 6.30pm.
First rounding time range - This function is entitled for the In time only. You can round the
In time into your preferred time. For example: any transaction between 9:01 am – 9:15am
will be rounded as 9:00am
Last rounding time range - This function is entitled for the Out time only. You can round the
Out time into your preferred time. For example: any transaction between 5:01pm to 5:15pm
will be rounded as 5:00pm
Break Rules