Maxim Integrated MAXQ7666 - Manual (Page 12)

The MAXQ7665/MAXQ7666 peripheral register space (modules 0 to 5) contains registers that access the following peripherals:
• General-purpose, 8-bit, I/O port (P0)
• External interrupts (up to 8)
• Three programmable Type 2 timer/counters
• Serial UART interface
• SPI
• CAN interface
• Analog input/output module
• Hardware multiplier
• JTAG debug engine
The lower 8 bits of all registers in modules 0 to 5 (as well as the AP module M8) are bit addressable.
Table 1-2. MAXQ7665/MAXQ7666 Register Modules
MAXQ7665/MAXQ7666 User’s Guide
1-10
MODULE NAME (BASE SPECIFIER)
REGISTER
INDEX
M0 M1 M2 M3 M4 M5 M8 M9 M11 M12 M13 M14 M15
00h PO0 MCNT T2CNA0 T2CNA2 C0C VMC AP A[0] PFX[0] IP
01h MA T2H0 T2H2 C0S APE APC A[1] PFX[1] SP
02h MB T2RH0 T2RH2 C0IR ACNT A[2] PFX[2] IV
03h EIF0 MC2 T2CH0 T2CH2 C0TE DCNT A[3] PFX[3] OFFS DP0
04h MC1 T2CNA1 C0RE DACI PSF A[4] PFX[4] DPC
05h MC0 T2H1 COR IC A[5] PFX[5] GR
06h SPIB T2RH1 C0DP DACO IMR A[6] PFX[6] LC0 GRL
07h SBUF0 SPICN T2CH1 C0DB A[7] PFX[7] LC1 BP DP1
08h PI0 SPICF T2CNB0 T2CNB2 C0RMS ADCD SC A[8] GRS
09h SPICK T2V0 T2V2 C0TMA TSO A[9] GRH
0Ah FCNTL T2R0 T2R2 AIE A[10] GRXL
0Bh EIE0 FDATA T2C0 T2C2 ASR IIR A[11] FP
0Ch MC1R T2CNB1 OSCC A[12]
0Dh MC0R T2V1 A[13]
0Eh T2R1 CKCN A[14]
0Fh T2C1 WDCN A[15]
10h PD0 T2CFG0 T2CFG2
11h T2CFG1 C0M1C
12h C0M2C
13h EIES0 C0M3C
14h C0M4C
15h C0M5C
16h C0M6C
Maxim Integrated