Comtech EF Data CRS-170A - Manual (Page 112)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM
Cables and Connections Revision 13
5–42
5.7.1.1 Modem-to-Switch Control Interface Connection
1) Excluding the modems, the KT/10860-1 CRS-170A 1:1 Redundancy Kit (see Sect.
5.7.1) provides all components shown in Figure 5-33.
2) When you connect the Control Interface cables between the CRS-170A and the
modems, make sure that you securely fasten the screw locks on the Type ‘D’
connectors. This prevents accidental disconnection of the cables, particularly
when you are removing and replacing a standby unit.
CEFD Part No. Qty Description
CA/WR9378-4 2 Control Cable – Universal, DB-9M, 4’
Figure 5-33. CDM-570L/AL Modem-to-Switch Control Connections