Comtech EF Data CRS-170A - Manual (Page 72)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM
Cables and Connections Revision 13
5–2
5) The modem-specific sections in this chapter identify the required redundancy
kit:
• Sect. 5.2 Common CRS-170A 1:1 Redundancy Control / IF Interface
Cabling Kits
• Sect. 5.3 Cabling the CDM-625 or CDM-625A
• Sect. 5.4 Cabling the CDM-850
• Sect. 5.5 Cabling the CDM-840
• Sect. 5.6 Cabling the CDM-760 or CDM-750
• Sect. 5.7 Cabling the CDM-570L/AL
• Sect. 5.8 Cabling the CDM-710GL
• Sect. 5.9 Cabling the CDM-710
• Sect. 5.10 Cabling the CDM-700
• Sect. 5.11 Cabling the CDM-600L (CLM-9600L)
• Sect. 5.12 Cabling the SDM-300L3
Separately sold interface kits and cable assemblies are available to facilitate
connection from the modems to a variety of user terrestrial data interfaces.
Examples of these cabling configurations are further identified throughout this
chapter.