Comtech EF Data CRS-170A User Manual

Page 22

Advertising
background image

CRS-170A L-Band 1:1 Redundancy Switch

MN/CRS170A.IOM

Introduction

Revision 13

1–2

Table 1-1. CRS-170A Compatibility Summary

Modem

1:1 Data Switch

Firmware/Hardware Requirement

Note 3

CDM-625A

Built into the CDM-625A

Firmware Ver. 1.1.1 or higher

CDM-625

Built into the CDM-625

Firmware Ver. 1.1.1 or higher

CDM-850

Built into the CDM-850

Firmware Ver. 1.7.1.X or higher

CDM-840

Built into the CDM-840

Firmware Ver. 1.2.4 or higher

CDM-760

Built into the CDM-760

Firmware Ver. 1.1.1 or higher

CDM-750

Built into the CDM-750

Firmware Ver. 1.1.1 or higher

CDM-570AL

Built into the CDM-570AL

Firmware Ver. 1.1.1 or higher

CDM-570AL w/Optional IP

Packet Processor

User-provided hub or Layer 2 switch

Firmware Ver. 1.2.1 or higher

CDM-570L

Built into the CDM-570L

Firmware Ver. 1.6.7 or higher

CDM-570L 2/optional IP

Module

User-provided hub or Layer 2 switch

Firmware Ver. 1.5.4.2 or higher

CDM-710GL

Built into the CDM-710GL

Firmware Ver. 5.1.1 or higher

CDM-710 (L-Band version) Built into the CDM-710

Firmware Ver. 2.4.1 or higher;

Chassis Rev. A or higher

CDM-700 (L-Band version) Built into the CDM-700

Firmware Ver. 1.1.6 or higher;

Chassis Rev. A or higher

CDM-600L (CLM-9600L)

CRS-150

Note 1

Firmware Ver. 1.1.4 or higher;

Hardware Rev. 3 or higher

SDM-300L3

SMS-301

Note 1

Special version of SMS-301

1)

See Sect. 1.3.3 for CRS-170A►Modem►Ancillary Switch interoperation

information. For detailed information about the CRS-150 and SMS-301

switches, see their respective Installation and Operation Manuals:

CRS-150 1:1 Redundancy Switch Installation and Operation Manual (CEFD

P/N MN/CRS150.IOM)

SMS-301 Redundancy Switch Installation and Operation Manual (CEFD P/N

MN/SMS301.IOM)

2)

This switch and its paired modems use Type ‘N’ connectors for L-Band

operation.

3)

Firmware updates are free and may be downloaded from the Comtech EF Data

web site (www.comtechefdata.com). If a modem does not meet the hardware

requirements, contact Comtech EF Data Product Support – hardware revision

upgrades must be performed at CEFD.

Advertising