Comtech EF Data CRS-170A - Manual (Page 96)

CRS-170A L-Band 1:1 Redundancy Switch MN/CRS170A.IOM
Cables and Connections Revision 13
5–26
5.4.2.2 CDM-850 Router Mode
Figure 5-22 shows the block diagram and cabling example for a CDM-850 1:1 redundant
configuration using the Gigabit Ethernet Interface in Router Mode. This configuration requires
no cabling kit – you must use user-provided Ethernet cables and Layer 2 switch for direct
connection to the modem via only one of eight RJ-45 ports. Both details depict the use of Port
‘GE1’.
CDM-850 Block Diagram – Gigabit Ethernet 1:1 Router Mode
Figure 5-22. CDM-850 Gigabit Ethernet 1:1 Cabling Example – Router Mode