Fluke Biomedical MPS450 - Manual (Page 23)

Introduction and Specifications
Using the MPS450
1
1-9
Using the MPS450
The MPS450 offers a wide array of simulations, functions, and adjustments that are easy
to use. During operation, press the MODE key (the yellow key located on the keypad
near the bottom of the unit) to enable either the menu-control or numeric-control mode.
In menu mode, simply press the top-menu key for a function group (labeled in yellow just
above the corresponding number key as shown in the Table 1-3), and then press one of
the four function keys (the blue keys located on the keypad just beneath the LCD) to
select from options displayed on the screen. In numeric mode, simply press the number
keys to enter the three-digit numeric code for the desired function, and select RUN.
Table 1-3. MPS450 Button Description
Number Key /
Key
Menu Label Menu Functions
NSR
Adjust ECG heart rate.
Adjust ECG amplitude.
Set patient type (age).
Adjust ST-segment elevation.
RESP
Adjust respiration rate.
Adjust respiration amplitude (impedance variation).
Simulate apnea.
BP
Zero all blood-pressure channels.
Set static-pressure levels for BP channels.
Run dynamic BP waveforms.
Simulate Swan-Ganz procedure.
Add respiration artifact to BP signal.
ARRHY
Run arrhythmia simulations (36).
PERF
Run ECG-performance waves.
Adjust performance-wave amplitude.
Adjust R-wave rate, width, and amplitude.
PACE
Run pacemaker waveform.
Adjust pacemaker-spike amplitude and width.
TEMP
Adjust body temperature.
CO
Simulate cardiac-output test.
Adjust injectate temperature and flow for CO test.
Simulate injectate failure.
Simulate left-to-right shunt.
Simulate output from a calibrated pulse signal.
MORE
Simulate ECG artifact.
Set fixed fetal heart rate.
Simulate intrauterine-pressure (IUP) wave.
Adjust IUP-wave period.