Fluke Biomedical MPS450 - Manual (Page 24)

MPS450
Operators Manual
1-10
Table 1-3. MPS450 Button Description (cont.)
Number Key /
Key
Menu Label Menu Functions
SETUP
Set respiration lead and baseline (impedance).
Set blood-pressure sensitivity.
Adjust viewing angle (contrast) for LCD screen.
Set beeper mode.
Switch between menu control and numeric control.
View current parameters.
Return to previous or top menu.
Select option displayed on LCD screen.
Viewing Current MPS450 Parameters
The current settings for adjustable parameters—such as heart rate and BP static-pressure
levels—are available for display at any time on a series of LCD screens that are accessed
by pressing the VIEW key.
(When the MPS450 is turned off, the parameters reset to defaults, with the exception of
settings that can be stored, i.e., respiration lead and baseline, BP sensitivity, view angle,
and beeper mode. Power-on default settings for functions are listed in the
“Specifications” section later in this chapter.)
Action in the Menu-Control Mode
1. Press the white key labeled VIEW to display the VIEW PAGE 1 screen—the ECG
page—which indicates current ECG settings:
gje003.eps
The types of parameters displayed on VIEW PAGE 1 depend on which group of
ECG waves is running. In this example (the ECG-NSR-wave group), the settings
displayed include NSR rate (90 BPM), patient type (ADULT), ST-segment elevation
(+.30 mV), NSR amplitude (2.00 mV), and ECG artifact (50 HZ).
Four other types of ECG-wave groups display different parameter types on VIEW
PAGE 1, and three other VIEW PAGE screens display parameters for respiration,
blood-pressure, and temperature/cardiac-output functions. Table 1-4 lists the
parameters available for viewing on the four pages: