Hypertherm HT4001 Plasma Arc Cutting System - Manual (Page 230)

H401 Slave Connections (cont.)
Slave Cable – HT4001 Power Supply to H401 Power Supply – Fig. a-5
• Connect the 1X8 end of the slave cable to the 1X8 connector on the HT4001 power supply.
APPENDIX A
4-98
a-8
HT4001
Instruction Manual
30
HT4001 PS H-401 CURRENT
END 1x8 COLOR SETPOING END DESCRIPTION
1 Red 2 Slave/Plasma On
5 Black 1 Slave/Plasma On
10 Drain – PE
2 Green 4 200A
6 Black 3 200A
11 Drain – PE
3 White 6 400A
7 Black 5 400A
12 Drain – PE
4 20 Slave Cable
8 7 Detect
Part No. Length
123377 25 ft (7,6 m)
1X8