D3 – lbd dsp status, Figure 51: d3 – lbd dsp status, Figure 51). click the – NavCom StarUtil-2110 Rev.B User Manual
Page 59
StarUtil-2110 User Guide – Rev. B
D3 – LBD DSP Status
The D3-LBD DSP Status tab provides information about the current performance of the StarFire
satellite in use.
9
Click the Retrieve button to view the current output data:
• SF Satellite ID: The ID for the currently used StarFire satellite.
Refer to Table 3 for a list of all the StarFire satellites.
• Eb/CNO: The StarFire signal strength:
< 0 Not Tracking
< 4 Weak
4-8 Good
> 8 Strong
• Use alternate channel: Indicates whether or not the satellite used is manually selected
(“Yes” or “No”). The manually selected satellite may be a licensed StarFire satellite or
the user-defined satellite (if defined). Refer to the section above, Alternate Channel, for
details.
Figure 51: D3 – LBD DSP Status
6-57