Chapter 9 ack/naks & general commands, Select ack/nak response ports, Key command – NavCom StarUtil-2110 Rev.B User Manual
Page 69: Get ephemeris, Chapter 9, Ack/naks & general commands, Figure 62: select ack/nak ports, Figure 63: key command window
StarUtil-2110 User Guide – Rev. B
Chapter 9 .................................................. Ack/Naks & General Commands
This chapter provides instructions to select the Ack/Nak response ports and access general
commands.
Ack/Nak means Acknowledged/Not Acknowledged. ACK indicates a successful
operation. NAK indicates a failure in executing a command.
Select Ack/Nak Response Ports
9
Select Receiver > Setup > Select Ack/Nak Response Ports to configure Port A and/or Port B
for Ack/Nak response. The Select Physical Ports window opens (see Figure 62).
Figure 62: Select Ack/Nak Ports
Key Command
9
Select Receiver > Commands > Key from the menu bar to open the Key Command window
(see Figure 63).
Use the Key Command window only in consultation with NavCom Customer
Support to input special receiver operating functions, generally to troubleshoot a
problem.
Figure 63: Key Command Window
Get Ephemeris
9
Select Receiver > Commands > Get Ephemeris from the menu bar to retrieve the current
ephemeris in the receiver and output it via the connected port.
9-67