Figure 61: b4 – event latch data – NavCom StarUtil-2110 Rev.B User Manual
Page 68
StarUtil-2110 User Guide – Rev. B
Figure 60: Event Latch Message 0xB4 On Trigger Configuration
9
Select View > B4 – Event Latch Data to view:
• Time: The time the event took place.
• Time FOM: 10x TDOP.
• Last: Shows the MM:DD:YYYY and HH:MM:SS of the last received event.
Figure 61: B4 – Event Latch Data
*PPS
9
The 1PPS output can be triggered on the Falling or Rising edge of the output pulse. Set the
characteristics of the 1PPS pulse according to application requirements (see Figure 59).
9
Add message 16 to the NCT Binary Messages window and set the Rate to On Trigger. The
1PPS Message 0x16 is input only when the chosen pulse edge of the outgoing pulse is
sensed by the receiver.
8-66
* Consult Release Notes on the NavCom web site for availability.