Teac GigaPulse - Manual (Page 100)

100
GigaPulse
™
User Guide
Gig
aP
uls
e-P
ro
Sig
na
l F
lo
w
GigaPulse-Pro Signal Flow
100
Mic to Mixer Routing-Different channels
Ok, what if we put the GigaPulse on some other pair of channels. (11,12 for example)
What would the Mic to Mixer Routing display then?
This is very straightforward. The numbers would start at 11 and go through 17 instead of
1-7.
Everything still works the same but using
channels 11-17 instead.
Keep in mind that in this setup, we don’t
recommend assigning any instruments to
channels 13-18.
They are being used to route the GigaPulse
audio and any instrument assigned to them
will also get routed to the channels output
and it will interfere with the GigaPulse audio
path.