Teac GigaPulse User Manual
Page 94
Advertising
94
GigaPulse
™
User Guide
Gig
aP
uls
e-P
ro
Sig
na
l F
lo
w
GigaPulse-Pro Signal Flow
94
The last step in routing the audio is to assign the mixer channels to audio outputs.
At the bottom of each mixer channel is an
output assignment
dropdown menu.
From that dropdown menu, you
can assign the mixer channel to
a mixer group or directly to the
audio card outputs.
In this case, assign each channel to a different
audio output.
Channel 1,2 to Outputs 1,2
Channel 3,4 to Outputs 3,4
Channel 5,6 to Outputs 5,6
Channel 7,8 to Outputs 7,8
Now the audio will be routed to the physical
outputs of the sound card.
Advertising