Teac GigaPulse User Manual
Page 153
Advertising
153
GigaPulse
™
User Guide
Im
pu
lse
Bu
ild
er-
M
ic P
lac
em
en
t
Impulse Builder-Mic Placement
153
Multi Placement Mode Src Plc Link (advanced mode only):
The Src Plc Link (Multi Placement Mode)
section specifies this Microphone’s
Source
Placement Link.
If enabled, this Microphone will be linked to the specified source
placement when the impulse set is loaded in to GigaPulse. To enable this mode, be sure
the
Multi Placement Mode
box is checked.
Here is an example with each microphone having its own custom link. (mLink)
Here is the result in the GigaPulse interface.
Advertising